Can I Fill All Four Ram Slots

Slots
This is the total number of memory upgrade slots (sockets) followed by their configuration. Banks are the way a system addresses memory. A bank must be completely filled with memory modules of the same size and type in order for the system to recognize and address the memory. i.e. :
3 (3 banks of 1) This indicates that there are 3 memory slots. These are divided into 3 banks, and each bank consists of one memory slot. So you can add memory one piece at a time for the system to use.

  1. And, potentially, it will perform better than before, when it had 2 sticks (adding another 4Gb stick to my 2x4Gb setup actually helped). Motherboards have memory slots separated in.
  2. If you had four free RAM slots on your board, which of the following would you choose: a) 16GB (2x8GB) or b) 16GB (4x4GB) Ignore the fact that getting 2x8GB sticks leaves you with room to upgrade - pretend 16GB was all you'll ever need. Just in terms of speed, reliability, power consumption.
Can i fill all four ram slots slotCan

It'll still support dual channel memory at 128-bits wide, but it might not support bank interleaving which may slow overall performance by 3% to 5%. Dual Channel with Bank Interleaving is best, using all four DIMM slots with a slight bump in VDIMM Voltage for stability. Last edited by wan-clan.org Gordy Freeman; Oct 11, 2016 @ 12:16am #4. Maximum memory: 8192MB Slots: 4 (2 banks of 2).Not to exceed manufacturer supported memory. 2GB 2GB 2GB 2GB. This is fantastic news both in terms of PC performance - and my wallet! On top of all that, the exisiting 2x2GB sticks that came pre-installed with the PC 3 years a go stay put - so no need for throwing unwanted memory sticks in a drawer. Even if the ram is the same model there is still a chance of problems. The only way to guarantee them playing nice together is to buy a matched set. Also the memory controller on the FXs is a.

Can I Fill All Four Ram SlotsSlots

4 (2 banks of 2) This indicates that there are 4 memory slots. These are divided into 2 banks, and each bank consists of two memory slots. So you must add memory two pieces at a time (they must be the same size and type of memory) in order for the system to benefit from the upgrade.

12 (3 banks of 4) This indicates that there are 12 memory slots. These are divided into 3 banks, and each bank consists of four memory slots. So you must add memory four pieces at a time (and they must be the same size and type of memory) in order for the system to benefit from the upgrade.

Can I Fill All Four Ram Slots Free

Ram

Can I Fill All Four Ram Slots Without

Hi Guys,
I've got an Asus P5B Deluxe motherboard. Today I tried adding some new RAM to take it from 4GB to 8GB. The board is about 6 years' old. I've never used the black RAM slots before, only the yellow ones (2x2GB in slots 1 and 3).
My system only sees 6GB, not 8GB. I've tried various combinations of the RAM, get the same result.
To check the new RAM wasn't defective, I tried it in slot 1, a known good slot. All 4 sticks of RAM worked in slot 1, so the RAM wasn't faulty.
All 4 sticks work in every slot except slot 2 (the first black RAM slot). If I put any stick in slot 2 - old or new - the PC is dead, it won't even boot to the BIOS.
So it looks like I have a defective RAM slot.
Does anyone know of any way to fix this? The board is too old to RMA. I've tried an emery board down the defective slot, and I've tried squirting WD40 down it. No improvement.
Does anyone have any other ideas on how to get that bad slot working?
Thanks!